Biotrue®

Ingredients:
Hyaluronan, sulfobetaine, poloxamine, boric acid, sodium borate, edetate disodium and sodium chloride; and preserved with a dual disinfection system (polyaminopropyl biguanide 0.00013% and polyquaternium 0.0001 %).
Usage Guidelines:
It is easy to care for frequent/planned replacement contact lenses that you use for more than a day. Just be sure to follow the routine your eye care professional recommends. Biotrue solution conditions, cleans, removes protein, disinfects, rinses and stores soft contact lenses including silicone hydrogel contact lenses.
These steps are recommended when using Biotrue Solution for a healthy and comfortable contact lens wearing experience:
STEP 1: Place at least 3 drops of Biotrue multi-purpose solution on each side of lens surface and gently rub for 20 seconds. Only use fresh solution to clean and disinfect contact lenses.
STEP 2: Thoroughly rinse each side of the lens for 5 seconds with Biotrue multi-purpose solution.
STEP 3: Place cleaned contact lenses in the lens case and fill with fresh Biotrue multi-purpose solution. Soak at least 4 hours. Remember to always use fresh solution – discard solution from lens case after each use.
Your contact lenses are now ready to wear. If any debris remains on contact lenses, rinse with Biotrue multi-purpose solution prior to insertion.
Store: If not wearing contact lenses immediately, store them in a closed lens case. Do not store your lenses in simple saline in place of Biotrue multi-purpose solution. Saline solution will not disinfect. Lenses may be stored in the unopened case until ready to wear, up to a maximum of 30 days. If you store your lenses for longer periods of time, they must be cleaned and disinfected with fresh Biotrue multi-purpose solution prior to lens insertion.
Available Sizes:
300 ml & 120 ml